Types of Rope Haulage

-
In this post we will discuss about the rest type of Rope Haulage system...So read it to the last....

B. Endless Rope Haulage system :-
As the name indicates "endless" means an endless Rope passes from driving drum which is located at the out bye end of the haulage road to the in bye end via a tension bogey.
In endless Rope haulage, two parallel tracks are required. The loaded tubs are on one track and the empties are on the other track.
The loaded tubs and the empty tubs are attached at regular intervals. At a time only one tubs is attached but by the use of lashing chain, attachment of a set of tubs are made.
For attachment or detachment of a tub, the clip is use( when the rope is in motion).
• Gradient Required :- 1 in 6.
• Speed of Rope :- From 3km/h to 7 km/h.
• Motion of Rope is in one direction.
•  Motor used :- Squirrel cage.

Disadvantages:-
 • It covers wide area for installation as two      tacks are required.
• If there is any big problem is arises in this     system, all the stand still.
• It can not serve the branch road as there      is  many problems are arises but by using    deflection pulley, it can serve for branch        roads.

Advantages :-
• This is a slow speed system due this the        derailment does not causes heavy damage    and also there is less wear and tear.
• The motor of less power is required.

C. Main and tail Rope Haulage :-
In this system there are two drums required separately  one for loaded train and other for empty train.
When the one drum there is one rope is in gear then the other drum revolves freely but in control manner and a brake is also
Present to keep rope taut.
• The main rope is equal to length road but the tail rope is in twice length.
• Suitable for undulating roadway.
• This system is installed for branching.
• The speed is high that's why derailment occurs.

D. Gravity Haulage
 This is the simplest mode of transportation because in this system there is no motors are employed but having a strap braking system.
It is installed at the top of inclined roadway
 and the pulley is in vertical position. Only a single roadway is require but at midway a bye pass road is required for the passes of empty train and the loaded train.
• The name of the pulley is "Jig pulley".

*What is tub?
 - It is a open box like structure (open at top) mounted on the frame of wood with wheel.
The capacity of tub is of  1.1 cubic meter usually.

*What is mine car?
- This is of larger in capacity usually 3cubic meter or more.

If you have any question or any suggestion about this post you can contact me. You are always welcome.

Popular posts from this blog

Secondary Blasting Technique

-
Image
In this post we will deal about the Definition of Secondary Blasting and types of Secondary Blasting . Some other Blasting are also available you can read about that. So let's start... Definition of Secondary Blasting The technique used to blast the boulders to achieve the fragmentation is called secondary blasting. This blasting is done to get the rocks which can be easily handled. Why and how to do secondary blasting? Why secondary blasting? We does secondary, in case when the primary blasting don't give fragmentation of rock which can be easily handled. The secondary blasting is followed after the primary blasting. How to do secondary blasting? To do secondary blasting we have to follow some methods which will give us batter resultant. These are here 1. Plaster shooting or Mud Capping.. As name indicates mud capping, the primer cartridge is place at top of Boulder and covered with mud. The blasting is done from the safe place by electric detonator
Read more

Bord and Pillar Method

-
Image
Bord and Pillar Method of mining involves in the formation of roadways and the development of Mines. The first stage of working of Bord and Pillar Method is Called Development. In the development stage parallel roads are driven nearly at right angle to the first set. These roads are also use to join the separated coal blocks. The network of roads regularly increases as development of the mine. The second stage of working of Board and Pillar Method  of mining is called Depillaring. The Depillaring can be understood by It's name(De-Pillaring). In Depillaring the working involves in the extraction of coal from the Pillars. These are two stages of this mining method. The another name of Bord and Pillar method is "Pillar and Stall". For the application of Bord and Pillar Method there are some conditions to be full filled. Conditions are.... •The thickness of seam seam should be more than 1.5m. •There is less amount of dirt bands present in seams. •Se
Read more

Shaft Sinking

-
Image
Q. What is shaft? Ans. :- It is a vertical or inclined entry made to touch seams. The word shaft is used for underground mining entrance. Q. Why shaft? Ans.:- The shaft is excavated after getting approval to mine the mineral bed by underground method of mining. Simple View of Working Shaft Shape of Shaft Generally the shaft are of circular in shape but in some mines it is of rectangular in shape. The circular shafts are best because they resist heavy side pressure and offers least rubbing surface area for ventilation. Bricking and concreting job are easy and diameter of these shaft may be varies from 4.2mts to 6.7mts. ◆The shaft sinking process is costliest and time taking process. So it is necessary to drill pilot hole within the radius of 50m of main shaft which has to be drill. This pilot hole give us an idea about the rock and how we have to encounter those problem which will we face during shaft thinking. From this we will get a data about                      1
Read more