How To Get Gas Testing (GT) Certificate| New

-

Disclaimer

This post is only valid for Indian System of GT examination.


Introduction

If you want to Get GT(gas Testing) certificate then you are welcome. Here I will share the complete procedure to take GT Certificate.

If you are studying Mining Sirdar, Diploma in Mining or B.tech. It is very needy that you should have Gas Testing certificate to apply for different posts of mining industry.
The certificates are signed by the Principal of College or Mines Manager.

If you are here I'm sure that you already knows manythiong about what are Gases and itsi physiology.
If you are appearing for GT, The posts on Gas Testing may help you..



Document needed To apply Gas Testing Examinatio 

Here is the complete list of Documents which is required to apply G.T.

1. Gas Testing Form

Firstly You have to fill a G.T. form properly. Here is the new GT form

New GT Application Form

2.Lamp Handling certificate

Q. Why lamp Handling Certificate?
Ans.. Lamp handling certificate certifies a Miner's that now he is able to work with lamps. 

You can get Lamp handling cerficate from your college, V.T center or from any mines during your studies or training period.

3.Character certificate

1.If you are studying in any college, they will provide a character certificate.

 2.If you have passed from college then you have to attach certificate which is from court.

4. Medical Certificate

It is very integral part of this examination because if you want to appear you should have medically fit.

The fitness certificate will be provided after examined by MBBS doctor with the registration number.

5. Sefl attested Aadhaar and Tenth Marksheet (For D.O.B) Photocopy        

6.  Three photographs which is affix on A4 sized paper which is attested by Principal of of college or Mines manager.

7. IPO 

IPO stands for indian postal order which a rupee stamp. You can buy it from any post office. The value recommended by me is more than 20 rupees.

After posting your form they will verify the documents and send a Admit card for your examination. The time takes to complete this process is depends upon DGMS.


  • If you have any complain and suggestions, please comment below...

Comments

Post a Comment

Popular posts from this blog

Secondary Blasting Technique

-
Image
In this post we will deal about the Definition of Secondary Blasting and types of Secondary Blasting . Some other Blasting are also available you can read about that. So let's start... Definition of Secondary Blasting The technique used to blast the boulders to achieve the fragmentation is called secondary blasting. This blasting is done to get the rocks which can be easily handled. Why and how to do secondary blasting? Why secondary blasting? We does secondary, in case when the primary blasting don't give fragmentation of rock which can be easily handled. The secondary blasting is followed after the primary blasting. How to do secondary blasting? To do secondary blasting we have to follow some methods which will give us batter resultant. These are here 1. Plaster shooting or Mud Capping.. As name indicates mud capping, the primer cartridge is place at top of Boulder and covered with mud. The blasting is done from the safe place by electric detonator...
Read more

Bord and Pillar Method

-
Image
Bord and Pillar Method of mining involves in the formation of roadways and the development of Mines. The first stage of working of Bord and Pillar Method is Called Development. In the development stage parallel roads are driven nearly at right angle to the first set. These roads are also use to join the separated coal blocks. The network of roads regularly increases as development of the mine. The second stage of working of Board and Pillar Method  of mining is called Depillaring. The Depillaring can be understood by It's name(De-Pillaring). In Depillaring the working involves in the extraction of coal from the Pillars. These are two stages of this mining method. The another name of Bord and Pillar method is "Pillar and Stall". For the application of Bord and Pillar Method there are some conditions to be full filled. Conditions are.... •The thickness of seam seam should be more than 1.5m. •There is less amount of dirt bands present in seams. •Se...
Read more

Shaft Sinking

-
Image
Q. What is shaft? Ans. :- It is a vertical or inclined entry made to touch seams. The word shaft is used for underground mining entrance. Q. Why shaft? Ans.:- The shaft is excavated after getting approval to mine the mineral bed by underground method of mining. Simple View of Working Shaft Shape of Shaft Generally the shaft are of circular in shape but in some mines it is of rectangular in shape. The circular shafts are best because they resist heavy side pressure and offers least rubbing surface area for ventilation. Bricking and concreting job are easy and diameter of these shaft may be varies from 4.2mts to 6.7mts. ◆The shaft sinking process is costliest and time taking process. So it is necessary to drill pilot hole within the radius of 50m of main shaft which has to be drill. This pilot hole give us an idea about the rock and how we have to encounter those problem which will we face during shaft thinking. From this we will get a data about       ...
Read more