Drager Multigas Detector

-
Drager Multigas Detector is very convenient and handy instrument. It is use for the detection of CO and also other gases.
When CO is to be detected, a tube containing chemical and marked CO. Before fitting the tube in the pump the seal has to break.
The air is pumped to the prescribed number of times(1 to 10). When CO enters the tube, the chemical change occurs which changes the Colour and percentage of CO can be directly unidentified in the tube.
The tubes are not reusable and the life of tube is 2 years.
The minimum percentage of CO can be detected is 5ppm.


Popular posts from this blog

Secondary Blasting Technique

-
Image
In this post we will deal about the Definition of Secondary Blasting and types of Secondary Blasting . Some other Blasting are also available you can read about that. So let's start... Definition of Secondary Blasting The technique used to blast the boulders to achieve the fragmentation is called secondary blasting. This blasting is done to get the rocks which can be easily handled. Why and how to do secondary blasting? Why secondary blasting? We does secondary, in case when the primary blasting don't give fragmentation of rock which can be easily handled. The secondary blasting is followed after the primary blasting. How to do secondary blasting? To do secondary blasting we have to follow some methods which will give us batter resultant. These are here 1. Plaster shooting or Mud Capping.. As name indicates mud capping, the primer cartridge is place at top of Boulder and covered with mud. The blasting is done from the safe place by electric detonator
Read more

Bord and Pillar Method

-
Image
Bord and Pillar Method of mining involves in the formation of roadways and the development of Mines. The first stage of working of Bord and Pillar Method is Called Development. In the development stage parallel roads are driven nearly at right angle to the first set. These roads are also use to join the separated coal blocks. The network of roads regularly increases as development of the mine. The second stage of working of Board and Pillar Method  of mining is called Depillaring. The Depillaring can be understood by It's name(De-Pillaring). In Depillaring the working involves in the extraction of coal from the Pillars. These are two stages of this mining method. The another name of Bord and Pillar method is "Pillar and Stall". For the application of Bord and Pillar Method there are some conditions to be full filled. Conditions are.... •The thickness of seam seam should be more than 1.5m. •There is less amount of dirt bands present in seams. •Se
Read more

Know everything about Fire Damp Explosion in Mines

-
Image
Before dealing with Fire Damp.. Here we will discuss About the Definition of Explosion and also we will know about the types of Explosion in Mines. ..So Let's Go... Q.What is Explosion? Ans...:- Explosion can be defined as it the process of sudden change in the volume of any substance instantaneously into gaseous product which produces large quantity of heat energy. Alike above explained, the explosion in mines are of three types. 1. Firedamp Explosion 2. Coal Dust Explosion 3. Water Gas Explosion In this post we will only discuss about "Fire Damp Explosion". 1. Explosion of Fire Damp(Methane) Fire damp is the most common cause of explosion in Coal Mines. The Coal Dust Explosion alone is very rare though it have been initiated by fire damp many times. The explosibility limit of firedamp is between 5.4 to 14.8% in presence of some ignition source and the percentage of Oxygen with respect to Methane percentage. "The maximum explosion
Read more